Skip to content
Description
Elevate the look of your interior wood with Rubio Monocoat Oil Plus 2C Pure. This premium quality, plant based two component oil finish is perfect for your interior wood projects. With its advanced molecular bonding technology, it protects your wood in just one layer, without any residue. The finish is easy to apply and dries quickly to a natural matte finish, highlighting the beautiful natural grain of the wood. Rubio Monocoat Oil Plus 2C in Pure provides superior protection against wear and tear, making it a great choice for high-traffic areas. Upgrade your interior wood finishes with Rubio Monocoat Oil Plus 2C in Pure for a beautiful, long-lasting result.
Features
- Monocoat contains 0% Volatile Organic Compounds (VOC), nor does it contain other harmful chemicals
- 40 colours of oil which may be combined or used in combination with pre-treatments for unlimited choice.
- Monocoat is economical. 1 Litre of oil is enough to finish 30-50 square metres of wood.
- The one coat system offers time savings of up to 42% compared to multi-coat wood finished.
- Enhances the natural look of wood at the same time as protecting the surface.
- Monocoat is versatile. The oils can be applied to any type of wood and can be used on floors, bathrooms, countertops, furniture, doors and stairs.
Specifications
| Coverage | 30m2 - 50m2 per Litre |
| Number of Coats | 1 |
| Documentation |
Application Instructions
Instructions for Furniture, Stairs & Countertops
- Sand the surface scratch-free. Final sand grit should be completed with 120 grit or 150 grit sandpaper (maximum 180 grit).
- Vacuum thoroughly, eliminate remains of dust with Rubio Monocoat Cleaner and wait until the surface is completely dry (check the technical data sheet of Rubio Monocoat Cleaner before use).
- Stir the A component until an even mixture is obtained. Carefully mix the two components (1 to 2 minutes) with a ratio of approximately 3 units A to 1 unit B.
- Spread out a small quantity of Rubio Monocoat Oil Plus 2C using a Scrubby pad or hand sander with a small 6 inch pad.
- Let absorb during a few minutes. Wipe away all excess oil with a cloth or a hand sander with a small white 6 pad. Finish off with a cloth within max. 30 minutes. The surface should not feel sticky!
Instructions for Floors
- Sand the surface scratch-free. A final sand using 120 grit sandpaper is ideal.
- Vacuum thoroughly, eliminate remains of dust with Rubio Monocoat Cleaner and wait until the surface is completely dry (check the technical data sheet of Rubio Monocoat Cleaner before use).
- Stir the A component until an even mixture is obtained. Carefully mix the two components (1 to 2 minutes) with a ratio of approximately 3 units A to 1 unit B.
- Work in zones of 5-10 m2. Start each zone by treating the borders with a scrubby pad. Then apply small quantity of Rubio Monocoat Oil Plus 2C using a brush or stick. Spread using a polishing machine with a beige or red pad.
- Thoroughly remove all excess oil with a cloth or a polishing machine with a white pad. The surface should not feel sticky!
- After having finished all the zones, pass again with a new white pad.
FAQ's
We do not recommend using Oil Plus 2C on cutting boards or butcher blocks that will be used for cutting.
Rubio Monocoat oil forms a molecular bond with the topmost microns of the wood. A knife can cut deeper than the product penetrates, leaving raw wood exposed and susceptible to mold and or bacteria growth.
However, as our product is safe to use on food surfaces, it is acceptable to use on charcuterie and serving boards.
We cannot guarantee adhesion, so you must discuss this with the lacquer manufacturer.
No, Oil Plus 2C must come in contact with raw cellulose in order to properly work.
Universal Maintenance Oil can be applied over Oil Plus 2C to increase the sheen level by 6-8%. Universal Maintenance Oil should not be applied to raw wood.
You can use Universal Maintenance Oil 48 hours after the proper application of Oil Plus 2C.
Because the product will not bond to itself, multiple coats are not needed. On softer species like walnut, a second application may be necessary to make sure that all areas have fully had the opportunity to react with the oil.
Yes, wood floors finished with Oil Plus 2C can be covered with a non-staining construction paper 48 hours after application.
Please remember:
- Never tape directly to the floor.
- Only tape paper to paper.
- Covering the floor will extend the cure time.
A lifetime with proper maintenance. We would expect the first maintenance to be needed somewhere between 2 and 5 years depending on wear.
Yes
Recommended final sanding grit is 120. We recommend sanding according to industry guidelines.
Under typical application and drying conditions:
- 24 hours - Gently handle or walk with socks
- 48 hours - Furniture can be introduced (no mats or carpets)
- 5 days - Full cure and liquid resistance.
You can walk on the floor with dry socks 8 hours after a proper application. However, it is best practice to wait 24-36 hours before walking on the floor.